Call us 24/7+254 700 031 732
0
0 KSh0.00
Call us 24/7+254 700 031 732

Archives

Home / Articles posted by Autoparts Africa (Page 16)
September 26, 2026 BY
IN Engine

Vent Oil Separator Replacement

Vent oil separator replacement helps maintain proper crankcase ventilation by separating oil mist from engine gases before they are recirculated or routed through the ventilation system. The vent oil separator helps reduce oil vapour entering the intake system while supporting appropriate crankcase pressure and efficient engine operation. Over time, the separator can become clogged, damaged, or less effective due to oil residue buildup, internal wear, or deteriorating seals. Common warning signs include increased oil consumption, oil leaks around engine seals, excessive oil residue in the intake system, rough idling, or unusual pressure within the crankcase. During this service, a qualified mechanic inspects the vent oil separator, associated hoses, ventilation passages, and seals to determine whether the component requires replacement. The faulty separator is carefully removed, and the surrounding connections are checked for blockages, cracks, or damage. A suitable replacement is then installed according to the vehicle manufacturer’s specifications, ensuring that all hoses, seals, and connections are properly secured. The mechanic checks the ventilation system for leaks and verifies that crankcase ventilation operates correctly after installation.

Read more
September 26, 2026 BY
IN Engine

Auxiliary Water Pump Replacement

Auxiliary water pump replacement helps maintain proper coolant circulation in vehicles equipped with an additional pump to support the engine cooling system or cabin heating system. The auxiliary water pump moves coolant through designated passages when additional circulation is needed, helping maintain consistent heating performance and appropriate temperature control. When the pump becomes worn, develops an electrical fault, or stops circulating coolant effectively, the vehicle may experience poor cabin heating, inconsistent coolant circulation, warning lights, or coolant leaks around the pump. During this service, a qualified mechanic inspects the auxiliary water pump, electrical connections, coolant hoses, and surrounding components to identify the cause of the problem. The mechanic checks for signs of leakage, unusual pump noise, electrical failure, or restricted coolant flow before confirming that replacement is necessary. The faulty pump is then removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications. The cooling system is refilled with the recommended coolant, and any required bleeding procedure is performed to remove trapped air. After installation, the mechanic tests the pump’s operation, checks coolant circulation, and inspects the system for leaks to ensure reliable performance. Replacing a defective auxiliary water pump helps restore the intended coolant flow, supports effective cabin heating where applicable, and contributes to dependable cooling system operation.

Read more
September 26, 2026 BY
IN Engine

Water Pump Pulley Replacement

Water pump pulley replacement helps maintain proper coolant circulation by ensuring that the engine-driven water pump receives the rotational force needed to operate effectively. The water pump pulley connects to the engine’s belt drive system and transfers power from the belt to the water pump, allowing coolant to circulate through the engine and radiator. Over time, the pulley may become worn, cracked, bent, corroded, or misaligned, affecting belt movement and water pump operation. Common warning signs include unusual squealing or grinding noises from the engine bay, visible pulley damage, belt misalignment, excessive vibration, or signs of overheating caused by reduced coolant circulation. During this service, a qualified mechanic inspects the water pump pulley, drive belt, tensioner, mounting hardware, and surrounding components to identify the source of the problem. The damaged pulley is carefully removed, and the mounting area is checked for wear or damage before a compatible replacement is installed according to the vehicle manufacturer’s specifications. The mechanic then verifies pulley alignment, checks belt tension where applicable, and confirms that the belt moves smoothly without unusual noise or vibration.

Read more
September 26, 2026 BY
IN Engine

Water Pump Replacement

Water pump replacement helps maintain proper engine cooling by ensuring that coolant circulates effectively between the engine and radiator. The water pump moves coolant through the cooling system, helping regulate engine temperature and prevent excessive heat buildup during operation. Over time, the pump may develop worn bearings, damaged seals, internal corrosion, or mechanical failure, reducing coolant circulation and increasing the risk of engine overheating. Common warning signs include coolant leaking near the water pump, unusual grinding or whining noises from the engine, rising engine temperature, coolant loss, or visible damage around the pump assembly. During this service, a qualified mechanic inspects the water pump, cooling system, drive belt, hoses, and related components to confirm the source of the problem. The faulty pump is carefully removed, and the mounting surfaces are cleaned before a compatible replacement is installed using the appropriate gasket or seal. Where required, the mechanic also inspects or replaces associated components, such as the drive belt and tensioner, according to the vehicle manufacturer’s recommendations.

Read more
September 26, 2026 BY
IN Engine

Windshield Washer Reservoir Replacement

Windshield washer reservoir replacement helps restore your vehicle’s ability to store windshield washer fluid for cleaning the windscreen and maintaining clear visibility while driving. The reservoir holds washer fluid that is delivered through hoses and spray nozzles when the washer system is activated. Over time, the reservoir may crack, develop leaks, become damaged by impact, or deteriorate due to age and environmental exposure. Common warning signs include washer fluid leaking beneath the vehicle, a reservoir that cannot hold fluid, frequent low-fluid warnings, or visible cracks around the tank. During this service, a qualified mechanic inspects the washer reservoir, fluid hoses, pump connections, mounting brackets, and related components to identify the source of the problem. The damaged reservoir is carefully removed, and the washer pump and associated fittings are checked for wear or damage before being transferred or replaced as necessary. A compatible replacement reservoir is then installed and securely mounted according to the vehicle manufacturer’s specifications.

Read more
September 26, 2026 BY
IN Exhaust System

Canister Purge Solenoid Replacement

Canister purge solenoid replacement helps restore proper operation of your vehicle’s evaporative emission control system, which manages fuel vapours and reduces their release into the atmosphere. The purge solenoid controls the flow of fuel vapours from the charcoal canister into the engine intake, where they are burned during normal combustion. When the solenoid becomes stuck, clogged, or electrically faulty, the vehicle may experience rough idling, difficulty starting after refuelling, increased fuel consumption, fuel vapour odours, or an illuminated check engine light. During this service, a qualified mechanic uses diagnostic equipment to check for relevant fault codes and inspects the purge solenoid, electrical connections, vacuum hoses, and related evaporative emission system components. Once the fault is confirmed, the defective solenoid is removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications. The mechanic then checks the hose connections, verifies electrical operation, and tests the system for proper purge control and possible leaks. Replacing a faulty canister purge solenoid helps restore controlled fuel vapour circulation, supports efficient engine operation, and reduces unnecessary hydrocarbon emissions.

Read more
September 26, 2026 BY
IN Exhaust System

Catalytic Converter Replacement

Catalytic converter replacement helps restore your vehicle’s exhaust emission control system when the existing converter becomes damaged, contaminated, or no longer functions effectively. The catalytic converter is part of the exhaust system and helps reduce harmful pollutants by converting certain exhaust gases into less harmful emissions before they leave the tailpipe. Over time, the converter may become clogged, overheat, suffer internal damage, or lose its effectiveness due to engine misfires, oil consumption, coolant leaks, or other engine-related problems. Common warning signs include reduced engine power, poor acceleration, increased fuel consumption, unusual exhaust odours, rattling noises from the exhaust system, or an illuminated check engine light. During this service, a qualified mechanic inspects the catalytic converter, checks relevant diagnostic trouble codes, and examines the exhaust system and engine performance to identify the underlying cause of the problem. Once replacement is confirmed, the faulty converter is removed and a compatible replacement is installed according to the vehicle manufacturer’s specifications and applicable emissions requirements. The mechanic also inspects exhaust connections and gaskets, checks for leaks, and verifies that the exhaust system operates correctly after installation. Replacing a faulty catalytic converter helps restore exhaust emission control, support proper engine performance, and reduce harmful vehicle emissions.

Read more
September 26, 2026 BY
IN Exhaust System

Evaporation Vent Solenoid Replacement

Evaporation vent solenoid replacement helps restore proper operation of your vehicle’s evaporative emission control system, which manages fuel vapours and prevents them from escaping unnecessarily into the atmosphere. The vent solenoid controls airflow through the charcoal canister, allowing the system to manage fuel tank vapours and perform leak checks as required by the vehicle’s design. When the solenoid becomes stuck, clogged, or electrically faulty, the vehicle may develop an illuminated check engine light, fuel vapour odours, difficulty completing an emissions system self-test, or problems with fuel tank ventilation. During this service, a qualified mechanic uses diagnostic equipment to check relevant fault codes and inspects the vent solenoid, electrical wiring, connectors, hoses, and charcoal canister for damage or blockages. Once the fault is confirmed, the defective solenoid is removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications.

Read more
September 26, 2026 BY
IN Exhaust System

Evaporative Emission Control Canister Replacement

Evaporation vent solenoid replacement helps restore proper operation of your vehicle’s evaporative emission control system, which manages fuel vapours and prevents them from escaping unnecessarily into the atmosphere. The vent solenoid controls airflow through the charcoal canister, allowing the system to manage fuel tank vapours and perform leak checks as required by the vehicle’s design. When the solenoid becomes stuck, clogged, or electrically faulty, the vehicle may develop an illuminated check engine light, fuel vapour odours, difficulty completing an emissions system self-test, or problems with fuel tank ventilation. During this service, a qualified mechanic uses diagnostic equipment to check relevant fault codes and inspects the vent solenoid, electrical wiring, connectors, hoses, and charcoal canister for damage or blockages. Once the fault is confirmed, the defective solenoid is removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications.

Read more
Menu
Call us 24/7+254 700 031 732

Search for products

Back to Top
Product has been added to your cart