Call us 24/7+254 700 031 732
0
0 KSh0.00
Call us 24/7+254 700 031 732

Category: Wiper System

Home / Wiper System
September 26, 2026 BY
IN Wiper System

Windshield Washer Pump Replacement

The windshield washer pump is a small electric water pump. When the washer pump is activated, it takes the washer fluid from the windshield washer reservoir and directs it to be sprayed through the washer jets onto the windshield. It is an electrical component that can fail over time. If you don’t see any fluid coming out of the washer jets when you activate the windshield wiper switch, ask the mechanic to check the tubes for cracks and the nozzles for clogging.

 

Whenever the windshield washer pump is repaired or replaced, the entire windshield washing system should be inspected. It’s possible that the nozzles or the wiper switch are actually the cause of the problem.

 

Test operation of the wiper switch. | Make sure the nozzles are not clogged. | Test for power and ground at the washer pump. | Remove and replace the washer pump. | Test for proper operation of the washer system.

 

The windshield washing and wiping system is usually not inspected during routine maintenance. However, anytime a part of the windshield washing and wiping system is replaced or repaired, the windshield washer pump should be checked. If you notice that your vehicle is having a hard time spraying wiper fluid onto your windshield, you should schedule an inspection.

 

Your windshield washing system is designed to keep your windshield clean and your visibility high. When you pull the windshield washer switch on the steering column, the windshield washer pump is activated. The windshield washer pump is an electric water pump that pulls washer fluid from the windshield washer reservoir, and sends it to the washer jets, where it is sprayed onto the windshield through nozzles. This washer fluid acts as soap, and the windshield wiper blades then wipe it off. This process cleans your windshield of any dirt and debris that has accumulated on it. When the windshield washer pump malfunctions, washer fluid will not be sent to the washer jets, and your vehicle will not be able to spray washer fluid onto the windshield. As a result, your visibility will decrease.

September 26, 2026 BY
IN Wiper System

Windshield Wiper Arm Replacement

The windshield wiper system is designed to keep the windshield clear in rain, snow, or when dirt and debris obstruct your view. When the windshield wiper switch is turned on, power goes to the windshield wiper motor and transmission. Linkage attaches the windshield wiper transmission to the wiper arms. The windshield wiper transmission causes the windshield wiper arms to move in a side-to-side motion against the windshield or back window to keep it clear and clean. When the windshield wipers aren’t touching the window, the wipers chatter continuously against the window when they are turned on, or the windshield wiper moves but the one or both of the wiper arms stay put, it may be time to replace your windshield wiper arms.

 

Install new wiper blades any time a windshield wiper arm is replaced. | Replace both windshield wiper arms at the same time.

 

The hood is opened and supported as needed. The wipers are put into the park position (the position where the wipers rest when not in use) before removal of the wiper arm. The position is noted by a small grease marker mark on the windshield. | The old wiper arm is removed from the vehicle. | The new wiper arm is installed and aligned with the mark on the window. Any marks are removed from the window using glass cleaner. | The hood is closed as required and the wipers are tested for proper operation. | The windshield wipers are tested for proper operation with a hose running water on the window.

 

The windshield wiper arms are responsible for keeping your windshield clear and maintaining your road visibility. If you can’t see the road properly because your wipers aren’t working well, schedule an inspection.

 

Being able to clearly see your way down the road is one of the most important factors in driving. If your wipers aren’t working properly, get the system checked right away.

September 26, 2026 BY
IN Wiper System

Windshield Wiper Blade Replacement

A windshield wiper consists of a pivoting arm with a long rubber blade. Powered by the wiper motor, the blade swings back and forth over the glass windshield, clearing debris and enhancing visibility. Wiper blades are made of rubber and as such, the sun and other elements cause damage that prevents the blades from doing their job.

 

Oil or wax build up on the windshield will not be removed by the windshield wipers.

 

Remove and replace wiper blade(s)

 

Have your wiper blades inspected and changed every year. The best time for this is right after summer, before the rainy season arrives.

 

Your windshield wipers are responsible for giving you visibility out of your windshield. When you pull the lever on your steering column, the rubber windshield wiper blades run across your windshield, and wipe away any water or debris that has accumulated on the glass. When your windshield wiper blades break or die, the wipers won’t be able to clean away your windshield. If you are driving in the rain, your vehicle will have no way of getting the water off of the windshield, and you will have next to no visibility, which makes driving very dangerous.

September 26, 2026 BY
IN Wiper System

Windshield Wiper Linkage Replacement

Windshield wipers give the driver a clear view of the road ahead. In order to clear rain from the windshield effectively, the wipers are synced up to move water off to the sides. In order to get power to the wiper arms and to keep the wipers synchronized, the windshield wiper linkage is needed. The linkage allows power from the wiper motors to get the wiper arms.

 

Some windshield wiper linkages use many components, while others use as little as one bracket. | Having more pieces may or may not make the wiper assembly more prone to breaking.

 

The vehicle hood is raised and secured in the open position | The wiper linkage bolts are loosened and removed. | The wiper linkage is removed | The new wiper linkage is installed and properly lubricated | The wipers are tested for proper operation

 

When issues come up with your windshield wipers, it’s commonly an indication that the windshield wiper linkage is broken or otherwise in poor operating condition. This should be addressed right away. When the mechanic is diagnosing the issue, he/she can inspect the wiper motor and the points at which the linkage attaches to the motor and wiper arms. If these spots have a lot of corrosion or are not in good working condition, they can be replaced at the same time to save time and money in the future.

 

Windshield wipers perform a simple function, but they are integral to driving on the road safely. Whether you’re in light rain or a downpour, driving with malfunctioning wipers is dangerous. It is important to have wiper issues addressed immediately.

September 26, 2026 BY
IN Wiper System

Windshield Wiper Motor Replacement

The windshield wiper motor is a small electric motor. A shaft coming out of the motor connects to a linkage/transmission assembly that converts the rotary shaft movement of the motor to the linear, back-and-forth motion of the wiper arms across the windshield. In addition to the windshield wiper motor in the front, some SUVs, vans, hatchbacks and station wagons have an additional wiper motor mounted in the tailgate to keep the rear window clear. When to consider replacing the windshield wiper motor? No wiper function at all. Windshield wiper motors can fail, but prior to replacing the motor, the mechanic will check its power supply. Wipers don’t park in the down position. There is an internal switch in the wiper motor that keeps the motor powered after you have shut it off to ensure the wipers park in the right spot. If that switch fails, the wiper motor must be repaired or replaced. Erratic or slow wiper operation. If the electric motor or the transmission have worn excessively, you might experience erratic, intermittent, or slow wiper operation. Grinding or clunking noises. Excessive wear in the motor transmission or wiper linkages may cause noise. A mechanic will determine the cause of the noise before performing repairs. How do mechanics replace the windshield wiper motor? Remove the cowl and any covers over the wiper motor and transmission assembly. Remove the plug harness to the motor and disconnect the wiper transmission arm from the wiper motor. Remove the bolts holding the motor and transmission assembly to the body of the car. Install the new motor. The plug harness is usually keyed so it can only be inserted in one direction. If not, the proper polarity must be observed. Bolt the motor to the car body. Cycle the motor several times by turning it on and off to establish the park position, then re-attach the linkage transmission assembly to the wiper motor. Install all covers, cowling, and so forth and test operation of the motor on a wetted glass only. Is it safe to drive with a windshield wiper motor problem? Yes. So long as the weather is clear and there is no rain, snow, or ice, it is safe. However, if the wiper motor is not functioning properly driving in adverse weather conditions is quite risky and may even be impossible in heavy rain, which will often completely obscure your view through the windshield. Due to the unpredictability of the weather, it is always best to have the windshield wiper system in good working order. When replacing the windshield wiper motor keep in mind: Never turn on the wipers if the windshield wiper blades are frozen to the windshield or their path is blocked by snow or ice. When the wiper motor is replaced, all the linkages in the wiper system should be lubricated. The rubber inserts in the wiper arm have a lifetime of about 1 to 2 years. Replacing the inserts regularly will make it safer to drive in adverse weather.

 

 

 

 

September 26, 2026 BY
IN Wiper System

Windshield Wiper Refill Replacement

The wiper arm is mounted below the windshield and is attached to the wiper linkage, which moves the arms back and forth. The wiper blade itself attaches to the arm, and holds a wiper insert, or wiper refill. The wiper refill is what actually makes contact with the windshield and removes water and snow, allowing you to have a clear view of the road ahead. Over time, your wiper inserts will begin to wear. The rubber weathers, with cracks and tearing, causing poor contact with the windshield glass and poor clearing.

 

Due to normal wear and tear, windshield wiper refills will begin to shrink, crack and dry, making them unable to efficiently clear water from the windshield glass. | Wiper blades in poor condition can create a safety issue as your view of the road is obstructed.

 

The wiper arms are lifted away from the windshield | The wiper blade holder is unclipped from the wiper arm | The defective wiper is removed from the wiper blade holder the new one installed | The wiper blade holder is reinstalled onto the wiper arms | The wiper arms are lowered down to windshield and tested to work properly

 

Have your windshield wiper refills replaced whenever you notice poor windshield clearing and cleaning. Most experts recommend replacing your inserts every six months or so, with variations based on the temperatures and weather conditions. It is important that you obtain the right size blades for your car. Your driver’s side blade will have a different length from the passenger side in most instances, and each vehicle requires a specific size combination.

 

Windshield wiper refill replacement is important to ensure safety while driving in inclement weather. Have one of our expert mechanics replace your inserts, which will ensure the right size refills, and inspect for any potential problems with the wiper system.

September 26, 2026 BY
IN Wiper System

Windshield Wiper Switch Replacement

The windshield wiper switch is located inside your car and is attached to the steering column. When the driver flips the wiper control, the wiper motor turns on/off the wipers. If the wiper blades are not stopping, it may be the motor itself and not the switch or it may be the “park” switch. Your mechanic should verify the problem before replacing the switch.

 

If the windshield wipers do not work, it may be the windshield wiper motor that is malfunctioning, and not the switch. | When the windshield wiper switch is replaced, the entire windshield wiper system should be inspected.

 

Inspect the switch, fuses, and wirings. | Remove and replace the switch if faulty. | Operate the windshield wipers and verify proper speed and park operations.

 

Windshield wiper systems are not usually a part of routine maintenance and servicing. Windshield wiper switches will usually last a very long time, so they don’t need much preventative action. If any part of your windshield wiper system is being replaced or repaired, however, you should have your windshield wiper switch inspected. Otherwise, if your windshield wipers ever stop working, schedule an inspection.

 

When you want to use your windshield wipers, you pull the windshield wiper switch, which is located on your steering column. This switch triggers the windshield wiper motor, which runs the windshield wiper blade across your windshield, eliminating the water and debris that is clouding your visibility. If your windshield wiper switch breaks, you won’t be able to activate your windshield wipers. This means that your windshield will have no way of being wiped clean in adverse weather conditions, and your visibility may be dangerously low.

September 26, 2026 BY
IN Wiper System

Windshield Wiper/Washer System Inspection

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible. There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty. Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades. The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch; this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

 

 

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

 

 

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

September 26, 2026 BY
IN Wiper System

Wiper Gearbox Replacement

Your windshield wipers remove water, snow and other impediments, allowing you to see the road ahead clearly. Windshield wiper systems require linkages and a gearbox to drive them at the preset rate (intermittent, low, high, etc.). It is generally located at the base of the windshield, under the hood and the cowling. The gearbox is directly connected to the wiper arm linkage that causes the windshield wiper pivots to turn and wipe the window. The gears inside the gearbox are subject to wear, though the usual failure is due to operation with excess weight on the wiper arms such as snow. This causes the internal gears to bind, bend or strip.

 

Once a gearbox sees significant wear, wipers will not function optimally and eventually stop | working altogether. Replacing the wiper blades is a good idea anytime a wiper system component needs repair.

 

The wiper arms are removed from the wiper gear box | The cowl is removed to access the wiper gear box | The defective wiper gear box is removed and the new one installed | The cowl is reinstalled and the wiper arms are installed onto the gear box | The wipers are tested to work in all positions

 

The wiper gearbox is a sealed system and cannot be serviced in most instances. When it malfunctions or show signs of failure, replacement is necessary. Have one of our expert mechanics look at it to ensure a smooth replacement and to professionally inspect wiper arm linkages and other system components.

 

Because your windshield wipers are responsible for ensuring a clear view of the road during inclement weather, it’s important to have the wiper gearbox replaced when wear and tear begins to take a toll. We recommend having the problem first diagnosed by one of our expert mechanics, who will determine if the issue is the switch, the gearbox, or the relay, and inspect the rest of the wiper system (including linkages and wiper arms). Our complimentary services in brief, include; Sell of Car Parts (Second Hand, New Parts) & Car Accessories (Car Mats, DIY Products) Battery Charging Centres (Outside Nairobi – Physical Container based Outlets) Car Valuation Services (Through Partnerships: Regent Valuers) Car Towing Services (Through Partnerships) Car Insurance Services (Through an Prime Mover Insurance Agent) FinTech Solution (In-House) Electronics Parts Catalogue (EPC): Partnerships – ToyoDIY, TechDoc, AutoDoc Information Portal: Everything about Cars, Events Publishing, Dedicated Blogs, Loyalty Program (In-House) Inventory System: Created In-House for our Suppliers especially smaller stockists all over Africa Industrial Attachment, Volunteer Service

September 26, 2026 BY
IN Wiper System

Washer fluid does not spray onto windshield Inspection

Washer fluid exists to help you keep your windshield clean while you’re driving. It’s both a creature comfort and a safety precaution, as it can help you retain visibility if debris or other matter hits your windshield. Some vehicles let you know when you have low washer fluid, but there’s no warning light for a malfunction with the fluid spraying system itself.

 

 

A top-rated mobile mechanic will come to your home or office to determine why the washer fluid won’t spray onto the windshield, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs. The mechanic will first check the pump and switch so see if it is functioning properly. Next he will check the hoses and nozzles to ensure there is no blockage preventing the fluid from making it out of the tank. Once the problem is identified, the repair is usually very straightforward.

 

 

You’re unlikely to do any damage to your vehicle by driving it when the washer fluid isn’t spraying. However, if you get a dirty windshield you’ll be stuck with low visibility, which can present a safety issue. Book a mechanic to perform a thorough inspection and resolve the issue.

Menu
Call us 24/7+254 700 031 732

Search for products

Back to Top
Product has been added to your cart