Call us 24/7+254 700 031 732
0
0 KSh0.00
Call us 24/7+254 700 031 732

Category: Suspension & Steering

Home / Suspension & Steering (Page 4)
September 26, 2026 BY
IN Suspension & Steering

Power Steering Pressure Switch Replacement

A power steering pressure switch replacement service addresses problems caused by a faulty switch that monitors hydraulic pressure within your vehicle’s power steering system. In vehicles equipped with this switch, the pressure signal helps the engine control unit (ECU) adjust engine operation when additional load is placed on the engine during steering manoeuvres. When the switch fails or sends inaccurate signals, you may experience irregular engine idling while turning the steering wheel, an illuminated check engine light, or diagnostic trouble codes related to the power steering pressure circuit. During this service, a technician scans the vehicle for fault codes, inspects the pressure switch and its electrical connections, and checks the surrounding hydraulic system for leaks or other issues. If the switch is confirmed to be defective, it is replaced with a compatible component suited to your vehicle’s specifications. The technician then checks the electrical signal, inspects for fluid leaks where applicable, and verifies that the engine management system responds correctly to steering load. Replacing a faulty power steering pressure switch helps restore accurate pressure monitoring, supports proper engine response during steering manoeuvres, and maintains reliable operation of the power steering and engine management systems.

Read more
September 26, 2026 BY
IN Suspension & Steering

Control Arm Assembly Replacement

A control arm assembly replacement service addresses suspension problems caused by a worn, bent, cracked, or damaged control arm that can affect wheel alignment, steering response, and vehicle stability. The control arm connects the wheel hub or steering knuckle to the vehicle’s chassis, allowing the suspension to move up and down while helping maintain the correct position of the wheel. When the control arm or its bushings and ball joint deteriorate, you may notice clunking noises over bumps, uneven tyre wear, steering instability, vibration, or reduced handling comfort. During this service, a technician inspects the control arm assembly, checks its bushings, ball joint, and mounting points, and identifies any related suspension damage. The faulty assembly is replaced with a compatible component suited to your vehicle’s suspension design. The technician then tightens the mounting hardware to the manufacturer’s specifications and checks the suspension for proper movement. Wheel alignment is checked and adjusted where necessary to help restore the correct wheel angles. Replacing a damaged control arm assembly helps restore suspension stability, improve steering response, reduce abnormal tyre wear, and support safer, more predictable handling.

Read more
September 26, 2026 BY
IN Suspension & Steering

Differential/Gear Oil Replacement

A differential or gear oil replacement service helps maintain the performance and durability of your vehicle’s differential and other applicable gear assemblies by replacing old, contaminated, or degraded lubricant. Differential oil reduces friction between gears and bearings, helps control operating temperatures, and protects internal components from excessive wear during power transmission. Over time, the oil can deteriorate or become contaminated, reducing its ability to protect moving parts effectively. During this service, a technician checks the differential or relevant gear housing for leaks, inspects the condition of the existing lubricant where possible, and drains the old oil according to the manufacturer’s procedure. The assembly is then refilled with the correct grade and specification of gear oil recommended for your vehicle. The technician checks the fluid level, inspects the drain and fill plugs for leaks, and verifies that the assembly is properly sealed. Replacing differential or gear oil at the recommended service intervals helps protect gears and bearings, reduce friction and abnormal noise, support smooth power transfer, and extend the service life of your vehicle’s drivetrain components.

Read more
September 26, 2026 BY
IN Suspension & Steering

Differential Fluid Service Replacement

A differential or gear oil replacement service helps maintain the performance and durability of your vehicle’s differential and other applicable gear assemblies by replacing old, contaminated, or degraded lubricant. Differential oil reduces friction between gears and bearings, helps control operating temperatures, and protects internal components from excessive wear during power transmission. Over time, the oil can deteriorate or become contaminated, reducing its ability to protect moving parts effectively. During this service, a technician checks the differential or relevant gear housing for leaks, inspects the condition of the existing lubricant where possible, and drains the old oil according to the manufacturer’s procedure. The assembly is then refilled with the correct grade and specification of gear oil recommended for your vehicle. The technician checks the fluid level, inspects the drain and fill plugs for leaks, and verifies that the assembly is properly sealed. Replacing differential or gear oil at the recommended service intervals helps protect gears and bearings, reduce friction and abnormal noise, support smooth power transfer, and extend the service life of your vehicle’s drivetrain components.

Read more
September 26, 2026 BY
IN Suspension & Steering

Lateral Link Replacement

A lateral link replacement service helps restore proper suspension alignment and vehicle stability when a lateral link becomes worn, bent, or damaged. The lateral link connects the wheel suspension to the vehicle’s chassis and helps control sideways wheel movement, maintain the correct wheel position, and support stable handling while driving. When the link or its bushings deteriorate, you may notice clunking noises over bumps, uneven tyre wear, rear suspension instability, or changes in vehicle handling. During this service, a technician inspects the lateral link, checks its bushings and mounting points, and examines related suspension components for wear or damage. If the link is faulty, it is replaced with a compatible part designed for your vehicle’s suspension system. The technician then secures the mounting hardware to the manufacturer’s specifications and checks the suspension for correct movement. Wheel alignment is checked and adjusted where necessary to ensure the wheels are positioned correctly. Replacing a worn or damaged lateral link helps restore proper wheel control, improve suspension stability, reduce abnormal tyre wear, and support safer, more predictable driving.

Read more
September 26, 2026 BY
IN Suspension & Steering

Air Bag Spring Replacement

A car air bag spring replacement service addresses suspension problems caused by a worn, leaking, or damaged air spring that can no longer support the vehicle’s weight and maintain the correct ride height. Air springs use compressed air to absorb road impacts, support vehicle loads, and help maintain suspension balance in vehicles equipped with air suspension. When an air spring develops a leak or fails, you may notice a sagging vehicle, uneven ride height, a harsher ride, reduced stability, or a suspension warning light. During this service, a technician inspects the air spring and surrounding suspension components, checks for air leaks and damage, and examines the air lines and connections to identify the cause of the problem. The faulty air spring is then replaced with a compatible component suited to your vehicle’s suspension system. The technician checks the connections, verifies ride height, and tests the air suspension system to confirm correct operation. Replacing a damaged air spring helps restore proper suspension support, maintain balanced vehicle height, improve ride comfort, and support stable handling under normal driving conditions.

Read more
September 26, 2026 BY
IN Suspension & Steering

Air Springs Replacement

A car air springs replacement service addresses suspension problems caused by worn, cracked, leaking, or damaged air springs that can no longer support your vehicle’s weight or maintain the correct ride height. Air springs use compressed air to absorb road impacts, support varying vehicle loads, and maintain suspension balance in vehicles equipped with air suspension systems. When an air spring fails, you may notice a sagging vehicle, uneven ride height, excessive bouncing, reduced ride comfort, or a suspension warning light. During this service, a technician inspects the air springs, checks for air leaks and physical damage, and examines the air lines, fittings, and related suspension components to identify the cause of the problem. Faulty air springs are replaced with compatible components designed for your vehicle’s suspension system. The technician then checks the connections, verifies ride height, and tests the air suspension system to confirm proper operation. Replacing worn or damaged air springs helps restore suspension support, maintain balanced vehicle height, improve ride comfort, and support stable handling under normal driving conditions.

Read more
Menu
Call us 24/7+254 700 031 732

Search for products

Back to Top
Product has been added to your cart