Call us 24/7+254 700 031 732
0
0 KSh0.00
Call us 24/7+254 700 031 732
September 26, 2026 BY
IN Suspension & Steering

Stabilizer Bar Bushings Replacement

Stabilizer bar bushings replacement helps address suspension noises, excessive body roll, and reduced stability caused by worn, cracked, or deteriorated bushings. Stabilizer bar bushings secure the sway bar to the vehicle’s chassis while allowing it to move as the suspension responds to bumps, corners, and changes in road surfaces. When these bushings wear out, you may notice clunking or squeaking noises over uneven roads, increased body movement when cornering, or a less stable driving feel. During this service, a technician inspects the stabilizer bar bushings, mounting brackets, and related suspension components for wear, damage, or looseness. Worn bushings are removed and replaced with compatible parts suited to the vehicle’s suspension design, and the mounting hardware is checked to ensure everything is properly secured. The technician then checks for abnormal movement or noise and may conduct a road test to assess suspension performance. Replacing worn stabilizer bar bushings helps reduce suspension noise, control body roll, and support more stable, predictable handling when turning or driving over uneven surfaces.

Read more
September 26, 2026 BY
IN Suspension & Steering

Shock Absorber Replacement

A shock absorber replacement service addresses suspension problems caused by worn, leaking, or damaged shock absorbers that can no longer control spring movement effectively. Shock absorbers help manage bouncing after bumps, maintain tyre contact with the road, and support stable handling during braking, cornering, and acceleration. When they deteriorate, you may notice excessive bouncing, a rough or unstable ride, longer stopping distances in some conditions, uneven tyre wear, or fluid leaking from the shock absorber body. During this service, a technician inspects the shock absorbers for leaks, damage, and reduced performance, while checking related suspension components and mounting points for wear. Faulty shock absorbers are replaced with compatible units suited to your vehicle’s suspension design. The technician then checks the mounting hardware and inspects associated components, such as suspension bushes and springs, where applicable. A road test may be performed to assess ride comfort and handling, and wheel alignment is checked if the repair affects alignment settings. Replacing worn shock absorbers helps improve ride comfort, maintain tyre contact with the road, reduce excessive body movement, and support safer, more predictable vehicle handling.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Pump Replacement

A power steering pump replacement service addresses steering problems caused by a worn, damaged, or failing pump that can no longer provide adequate hydraulic assistance. The power steering pump circulates pressurised fluid through the hydraulic steering system, helping you turn the steering wheel with less effort, particularly at low speeds and when parking. When the pump fails, you may notice heavy steering, whining or grinding noises while turning, fluid leaks, or inconsistent steering assistance. During this service, a technician inspects the power steering pump, checks the fluid level and condition, examines the drive belt and hoses, and tests the system to confirm whether the pump is responsible for the problem. If the pump is defective, it is replaced with a compatible unit suited to your vehicle’s specifications. The technician then refills the system with the manufacturer-recommended fluid, bleeds trapped air where necessary, and checks for leaks and abnormal noises. Steering operation is tested to verify smooth, consistent assistance. Replacing a faulty power steering pump helps restore reliable hydraulic pressure, improve steering control, protect related components, and support safer, more comfortable driving.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Pump Pulley Replacement

A power steering pump pulley replacement service addresses problems caused by a damaged, cracked, bent, or worn pulley that affects the operation of your vehicle’s hydraulic power steering pump. The pulley transfers rotational power from the engine through the drive belt to operate the pump, which supplies hydraulic pressure to assist steering. When the pulley becomes damaged or misaligned, you may notice squealing belt noises, pulley wobble, vibration, increased steering effort, or premature wear of the drive belt. During this service, a technician inspects the power steering pump pulley, checks its alignment and mounting, and examines the drive belt and surrounding components for signs of damage. If the pulley is defective, it is removed using the appropriate tools and replaced with a compatible component suited to your vehicle. The technician then verifies pulley alignment, checks belt tension according to the manufacturer’s specifications, and tests the power steering system for smooth operation and abnormal noises. Replacing a faulty power steering pump pulley helps restore reliable belt-driven pump operation, reduce unnecessary belt and component wear, and maintain consistent steering assistance.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Pressure Switch Replacement

A power steering pressure switch replacement service addresses problems caused by a faulty switch that monitors hydraulic pressure within your vehicle’s power steering system. In vehicles equipped with this switch, the pressure signal helps the engine control unit (ECU) adjust engine operation when additional load is placed on the engine during steering manoeuvres. When the switch fails or sends inaccurate signals, you may experience irregular engine idling while turning the steering wheel, an illuminated check engine light, or diagnostic trouble codes related to the power steering pressure circuit. During this service, a technician scans the vehicle for fault codes, inspects the pressure switch and its electrical connections, and checks the surrounding hydraulic system for leaks or other issues. If the switch is confirmed to be defective, it is replaced with a compatible component suited to your vehicle’s specifications. The technician then checks the electrical signal, inspects for fluid leaks where applicable, and verifies that the engine management system responds correctly to steering load. Replacing a faulty power steering pressure switch helps restore accurate pressure monitoring, supports proper engine response during steering manoeuvres, and maintains reliable operation of the power steering and engine management systems.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Pressure Hose Replacement

Car heater bypass tube replacement helps maintain proper coolant circulation when the bypass tube becomes cracked, corroded, damaged, or develops coolant leaks. The heater bypass tube allows engine coolant to circulate through the cooling system under specific operating conditions, depending on the vehicle’s design. A faulty tube can cause coolant loss, engine overheating, or reduced cooling system efficiency. A qualified technician will inspect the tube, connections, and surrounding cooling system components to identify leaks and determine whether replacement is necessary. Installing a compatible replacement tube and checking the coolant level and system operation helps restore reliable coolant circulation and protect the engine from overheating. AskAutoParts.Africa helps you find suitable automotive parts and service solutions to maintain dependable cooling system performance.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Fluid Service

A power steering fluid service helps maintain the smooth operation and reliability of your vehicle’s hydraulic power steering system. Power steering fluid transfers hydraulic pressure through the system, allowing you to turn the steering wheel with less effort while lubricating and protecting internal components such as the pump, steering gear, and seals. Over time, the fluid can deteriorate or become contaminated, potentially contributing to noisy steering, increased steering effort, or premature component wear. During this service, a technician checks the power steering fluid level and condition, inspects the reservoir, hoses, pump, and connections for leaks, and determines whether the fluid requires replacement. Where specified by the manufacturer, the old fluid is drained or exchanged and replaced with the correct fluid type and specification. The technician then verifies the fluid level, bleeds trapped air from the system where necessary, and checks steering operation for smooth, consistent assistance. Regular power steering fluid servicing helps maintain effective hydraulic pressure, reduce friction and wear, protect steering components, and support reliable steering performance.

Read more
September 26, 2026 BY
IN Suspension & Steering

Power Steering Fluid Reservoir Replacement

A power steering fluid reservoir replacement service addresses problems caused by a cracked, leaking, damaged, or deteriorated reservoir that stores hydraulic fluid for the power steering system. The reservoir helps maintain an adequate fluid supply to the power steering pump, supporting smooth steering assistance and reducing the risk of air entering the hydraulic system. When the reservoir develops a leak or becomes damaged, you may notice low power steering fluid levels, fluid stains beneath the vehicle, whining noises from the pump, or increased steering effort. During this service, a technician inspects the reservoir, cap, hoses, and connections to identify leaks or damage and checks the fluid condition. The faulty reservoir is replaced with a compatible component suited to your vehicle’s steering system. The technician then refills the system with the manufacturer-recommended fluid, checks for leaks, and bleeds the system where necessary to remove trapped air. Steering operation is tested to confirm smooth and consistent assistance. Replacing a damaged power steering fluid reservoir helps maintain the correct fluid supply, protect the power steering pump, prevent fluid loss, and support reliable steering performance.

Read more
September 26, 2026 BY
IN Suspension & Steering

Pitman Arm Replacement

A pitman arm replacement service addresses steering problems caused by a worn, loose, or damaged pitman arm in vehicles equipped with a recirculating-ball steering system. The pitman arm connects the steering gearbox to the steering linkage, helping transfer steering movement to the front wheels. When the pitman arm or its connection points deteriorate, you may notice excessive steering play, clunking noises from the front end, wandering while driving, or difficulty maintaining directional control. During this service, a technician inspects the pitman arm, checks its connection to the steering gearbox and centre link, and examines related steering components for excessive movement or damage. If the pitman arm is faulty, it is replaced with a compatible component suited to your vehicle’s steering system. The technician then secures the mounting hardware according to the manufacturer’s specifications and checks the steering linkage for correct movement. Wheel alignment is checked and adjusted where necessary. Replacing a worn or damaged pitman arm helps restore accurate steering response, reduce excessive steering play, improve directional stability, and support safer vehicle handling.

Read more
Menu
Call us 24/7+254 700 031 732

Search for products

Back to Top
Product has been added to your cart