Call us 24/7+254 700 031 732

Car shudders when turning Inspection

Being able to turn smoothly and confidently is an essential part of driving. If all of your
car’s various systems are working properly, you’ll have very little issue turning. However, if
you’re noticing that the car shudders when turning, or that there’s a vibration either in
the wheel or the driver’s seat during a turn, it means there’s something going wrong.
Other potential things to pay attention to while it’s happening include listening for a
whining sound, and listening for a clunking or knocking sound.

Car shuts off when stepping on gas pedal Inspection

Engine dying or stalling immediately when pressing the gas pedal? A stepping-on-gas stalling inspection diagnoses severe vacuum leaks, failed MAF sensors, weak fuel pumps, and clogged throttle bodies.Pressing the accelerator opens the throttle plate, instantly drawing a large volume of air into the engine; the engine control module (PCM) must immediately match this sudden air charge with a proportional pulse of fuel and ignition spark advance. If the air-fuel mixture leans out excessively during this transition, combustion fails instantly and the engine dies.

Car surges when air conditioning is on Inspection

Engine surging, revving up and down, or lurching when the A/C is turned on? An A/C surging inspection diagnoses failing A/C compressor clutches, dirty throttle bodies, bad idle control valves, and low refrigerant.Turning on the air conditioning places a sudden, heavy mechanical load on the engine through the serpentine belt, while simultaneously increasing electrical demand to power the condenser cooling fans.

Clunking noise when I drive over bumps Inspection

Heavy metallic clunking or knocking noise when driving over speed bumps or rough roads? A bump clunking inspection pinpoints worn sway bar links, blown struts, bad ball joints, and deteriorated control arm bushings.The most common cause of a sharp, metallic clunk over small bumps is worn sway bar end links or deteriorated sway bar frame bushings: as the rubber bushings or internal ball-and-socket joints wear down, the stabilizer bar slams against its mounting hardware under chassis movement.

Car or Steering wheel shakes when braking Inspection

Steering wheel vibrating or brake pedal pulsating when slowing down? A brake shaking inspection pinpoints warped brake rotors, sticking calipers, loose wheel bearings, and worn suspension bushings.An inspection for a car or steering wheel that shakes during braking involves a comprehensive diagnostic measurement of the front braking hardware, wheel hub assemblies, and steering linkages.

Search for products

Back to Top
Product has been added to your cart