Call us 24/7+254 700 031 732
0
0 KSh0.00
Call us 24/7+254 700 031 732

Tag: Car Repair Kenya

Home / Tagged "Car Repair Kenya" (Page 6)
September 26, 2026 BY
IN Fuel System

Fuel Pump Replacement

Fuel pump replacement helps restore reliable fuel delivery by ensuring that your vehicle’s engine receives the fuel required for proper starting, acceleration, and operation. The fuel pump transfers fuel from the tank to the engine at the pressure and flow rate specified by the vehicle manufacturer. Depending on the vehicle, the pump may be located inside the fuel tank or mounted externally along the fuel system. Over time, the pump may wear out, develop electrical faults, or lose its ability to deliver sufficient fuel, affecting engine performance and reliability. Common warning signs include difficulty starting the engine, engine stalling, hesitation during acceleration, reduced power, unusual whining noises from the fuel tank area, or an engine that cranks but does not start. During this service, a qualified mechanic inspects the fuel pump, electrical connections, fuel lines, filters, and related components to identify the cause of the problem. Appropriate diagnostic checks and fuel pressure tests are performed to confirm whether the pump requires replacement. The faulty pump is then removed using the recommended procedure and replaced with a compatible unit that meets the vehicle manufacturer’s specifications.

Read more
September 26, 2026 BY
IN Fuel System

Gas Cap Replacement

Gas cap replacement helps maintain a secure seal on your vehicle’s fuel tank, reducing fuel vapour loss and supporting the proper operation of the evaporative emission control system. The gas cap closes the fuel filler opening and, on many vehicles, helps maintain the pressure conditions required for effective fuel system monitoring. Over time, the cap or its sealing gasket may become worn, cracked, loose, or damaged, preventing it from sealing correctly. Common warning signs include a loose or missing gas cap, a fuel smell around the vehicle, an illuminated check engine light, or an evaporative emission system warning caused by a faulty seal. During this service, a qualified mechanic inspects the gas cap, sealing gasket, and fuel filler neck to determine whether replacement is necessary. The damaged cap is removed and replaced with a compatible unit that meets the vehicle manufacturer’s specifications. The mechanic then checks that the new cap fits securely, tightens or locks correctly, and forms a proper seal.

Read more
September 26, 2026 BY
IN Fuel System

Injector Control Pressure

Injector control pressure inspection and repair helps maintain the correct fuel injection pressure required for reliable engine starting, smooth operation, and consistent performance in vehicles equipped with high-pressure fuel injection systems. The injection control pressure system regulates the pressure needed to deliver fuel effectively, working with components such as the pressure sensor, regulator, and engine control module, depending on the vehicle design. When injection pressure becomes too high, too low, or inconsistent, the engine may experience difficulty starting, rough idling, reduced power, hesitation during acceleration, engine stalling, or an illuminated check engine light. During this service, a qualified mechanic uses diagnostic equipment to assess fault codes, inspect relevant electrical connections, and measure injection control pressure where appropriate. The mechanic checks the pressure sensor, regulator, fuel supply, and associated components to identify the underlying cause of the problem. Depending on the findings, the service may involve repairing electrical connections, replacing a faulty sensor or regulator, or addressing another component affecting pressure control.

Read more
September 26, 2026 BY
IN Filters

Car AC Air Filter Replacement

A car AC air filter replacement service helps maintain clean airflow through your vehicle’s air conditioning and ventilation system by removing dust, pollen, dirt and other airborne particles before they enter the cabin. A dirty, clogged or worn cabin air filter can reduce airflow from the vents, cause unpleasant odours and make the air conditioning system work harder to circulate air. Common signs that the filter needs replacing include weak airflow, musty smells when the AC is switched on and increased dust inside the vehicle. During the service, a qualified mechanic checks the filter’s condition, identifies its location and installs a suitable replacement that matches your vehicle’s specifications. Regular replacement supports better cabin air quality, more effective ventilation and a comfortable driving environment. The recommended replacement interval varies depending on the vehicle manufacturer, driving conditions and exposure to dust. Book a Car AC Air Filter Replacement service with Ask Auto Parts Africa to help keep your vehicle’s cabin air fresh and your ventilation system working efficiently.

Read more
September 26, 2026 BY
IN Filters

Car Air Filter Replacement

A car air filter replacement service helps protect your engine by preventing dust, dirt, sand and other airborne contaminants from entering the engine’s air intake. A clean air filter allows the engine to receive the airflow it needs for efficient combustion and reliable performance. When the filter becomes clogged or excessively dirty, you may notice reduced engine performance, sluggish acceleration, increased fuel consumption or unusual engine behaviour. During the service, a qualified mechanic inspects the existing air filter, checks the air filter housing for accumulated dirt or damage, and installs a suitable replacement that meets your vehicle manufacturer’s specifications. Replacing a worn or blocked air filter helps maintain proper airflow, supports efficient engine operation and reduces the risk of contaminants entering the intake system. The recommended replacement interval depends on your vehicle’s maintenance schedule and the driving conditions, especially when travelling on dusty roads. Book a Car Air Filter Replacement service with Ask Auto Parts Africa to help maintain your engine’s airflow, performance and long-term reliability.

Read more
September 26, 2026 BY
IN Exhaust System

Catalytic Converter Replacement

Catalytic converter replacement helps restore your vehicle’s exhaust emission control system when the existing converter becomes damaged, contaminated, or no longer functions effectively. The catalytic converter is part of the exhaust system and helps reduce harmful pollutants by converting certain exhaust gases into less harmful emissions before they leave the tailpipe. Over time, the converter may become clogged, overheat, suffer internal damage, or lose its effectiveness due to engine misfires, oil consumption, coolant leaks, or other engine-related problems. Common warning signs include reduced engine power, poor acceleration, increased fuel consumption, unusual exhaust odours, rattling noises from the exhaust system, or an illuminated check engine light. During this service, a qualified mechanic inspects the catalytic converter, checks relevant diagnostic trouble codes, and examines the exhaust system and engine performance to identify the underlying cause of the problem. Once replacement is confirmed, the faulty converter is removed and a compatible replacement is installed according to the vehicle manufacturer’s specifications and applicable emissions requirements. The mechanic also inspects exhaust connections and gaskets, checks for leaks, and verifies that the exhaust system operates correctly after installation. Replacing a faulty catalytic converter helps restore exhaust emission control, support proper engine performance, and reduce harmful vehicle emissions.

Read more
September 26, 2026 BY
IN Exhaust System

Evaporation Vent Solenoid Replacement

Evaporation vent solenoid replacement helps restore proper operation of your vehicle’s evaporative emission control system, which manages fuel vapours and prevents them from escaping unnecessarily into the atmosphere. The vent solenoid controls airflow through the charcoal canister, allowing the system to manage fuel tank vapours and perform leak checks as required by the vehicle’s design. When the solenoid becomes stuck, clogged, or electrically faulty, the vehicle may develop an illuminated check engine light, fuel vapour odours, difficulty completing an emissions system self-test, or problems with fuel tank ventilation. During this service, a qualified mechanic uses diagnostic equipment to check relevant fault codes and inspects the vent solenoid, electrical wiring, connectors, hoses, and charcoal canister for damage or blockages. Once the fault is confirmed, the defective solenoid is removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications.

Read more
September 26, 2026 BY
IN Exhaust System

Evaporative Emission Control Canister Replacement

Evaporation vent solenoid replacement helps restore proper operation of your vehicle’s evaporative emission control system, which manages fuel vapours and prevents them from escaping unnecessarily into the atmosphere. The vent solenoid controls airflow through the charcoal canister, allowing the system to manage fuel tank vapours and perform leak checks as required by the vehicle’s design. When the solenoid becomes stuck, clogged, or electrically faulty, the vehicle may develop an illuminated check engine light, fuel vapour odours, difficulty completing an emissions system self-test, or problems with fuel tank ventilation. During this service, a qualified mechanic uses diagnostic equipment to check relevant fault codes and inspects the vent solenoid, electrical wiring, connectors, hoses, and charcoal canister for damage or blockages. Once the fault is confirmed, the defective solenoid is removed and replaced with a compatible component that meets the vehicle manufacturer’s specifications.

Read more
September 26, 2026 BY
IN Exhaust System

Leak Detection Pump Replacement

The Leak Detection Pump triggers the Check Engine light when your vehicle has minor leaks that are hard to detect.

 

Federal law requires a working leak detection pump because it helps ensure your evaporative | emission system (EVAP) is functioning correctly. | It’s designed to mitigate fuel vapors escaping from the fuel system. Any leaks in the system can emit vapors that pollute the atmosphere, which is why it’s a regulated aspect of the vehicle’s engine.

 

Disconnect negative battery cable at the battery. | Determine the location of the Leak Detection Pump | Remove vapor/vacuum lines at Leak Detection Pump and disconnect electrical connector at the site. | Install a new Leak Detection Pump, reinstall vacuum lines and electrical connector | Reconnect and test the battery for proper operation | Recheck EVAP tests and clear codes

 

This repair is highly complex and is optimally performed by an experienced professional. Be sure to unhook the Leak Detection Pump from the battery tray in order to prevent damage to Leak Detection Pump wiring when you’re working on the Leak Detection Pump.

 

Leak Detection Pumps collect and move fuel vapors for combustion and monitor the fuel system to ensure there aren’t issues that can harm the environment or your vehicle. It’s a vital service because it makes sure that the rest of your vehicle is working properly.

September 26, 2026 BY
IN Fuel System

Carburetor Repair

Carburetor repair helps restore the proper air-fuel mixture required for smooth engine operation in vehicles equipped with a carburetor. The carburetor mixes fuel with incoming air in the correct proportions to support combustion, allowing the engine to start, idle, accelerate, and operate efficiently. Over time, dirt, fuel residue, blocked jets, worn seals, damaged floats, or faulty internal components can interfere with fuel delivery and affect engine performance. Common warning signs include difficulty starting the engine, rough idling, engine stalling, hesitation during acceleration, excessive fuel consumption, fuel leaks, or black exhaust smoke. During this service, a qualified mechanic inspects the carburetor, fuel lines, air intake, linkages, and related components to identify the source of the problem. Depending on the condition of the unit, the mechanic may clean blocked passages, adjust the air-fuel mixture and idle settings where appropriate, replace worn gaskets or damaged components, and repair faulty fuel delivery mechanisms.

Read more
Menu
Call us 24/7+254 700 031 732

Search for products

Back to Top
Product has been added to your cart